Flaring at the Martinez Refining Company will happen intermittingly over the next few days, the refinery said Wednesday.
“We are in the process of temporarily shutting down one of our process units at the Martinez refinery,” refinery spokesperson Brandon Matson said Wednesday morning. “The shutdown process will take a few days, during which there will be intermittent flaring to ensure the unit is brought down in a safe and controlled manner, following standard procedures. Importantly, the associated flaring is primarily the clean combustion of treated process gas. All appropriate agencies have been notified.”
Matson said following the unit’s shutdown, employees and contractor partners will safely conduct maintenance work over the next few weeks. Following completion of the work, they will restart the unit, during which intermittent flaring will occur again for a few days until the restart is complete.
“The associated flaring with the re-start will again be primarily clean-combusting treated process gas,” Matson said. “Prior to unit re-start, we will notify appropriate agencies and issue another community update.”
Contra Costa Health said last week it has documented nearly 50 flaring episodes since Thanksgiving 2022, when an accidental release of spent catalyst from the refining process sent 20 to 24 tons of material into the community surrounding the refinery. The release, which lasted until the following morning and about which the refinery didn’t officially notify the community for days, is being investigated by an independent panel and the Contra Costa County District Attorney’s Office.
Matson said Wednesday, “Flares are an essential part of a refinery’s integrated, engineered safety systems designed to safely manage excess combustible gases by burning them off efficiently and effectively.”
Matson said people can learn more about flaring by clicking ON THIS LINK (information also posted below).
WHAT IS A FLARE?
A flare is an integral part of the refining process also used in other industrial operations across the world. They are key safety devices to ensure the safe disposal of excess, flammable gases. Martinez Refinery’s use of the flare is strictly regulated by the Bay Area Air Quality Management District (BAAQMD), Contra Costa County Health Services Department, and the United States Environmental Protection Agency.
WHY DOES THE REFINERY FLARE?
The crude oil refining process generates gases that are transported throughout the refinery’s process units via a piping system. Unexpected events that cause our operating equipment, such as pumps and compressors, to shut down can lead to flaring. Such events may include a power interruption, similar to momentary power losses in our home that cause electrical alarm clocks to blink. Flaring may also occur during certain maintenance activities, including startup or shutdown of units to ensure safe operations.
HOW DO THE FLARES WORK?
When operations are interrupted by an unplanned event or a planned maintenance activity, the refinery experiences a build-up of gases in its pipelines that results in an increased pressure in the lines. The pressure must be safely relieved through approved safety devices that are connected into the flare system. The flare prevents releasing unprocessed, flammable material directly into the environment. The excess gases are combined with steam and burned to produce water vapor and carbon dioxide. This system ensures maximum combustion of hydrocarbons while minimizing emissions into the air. A pilot light at the top of each flare burns continuously so the flare is always ready when needed.
ARE THE FLARES SAFE?
Yes. Although flaring is necessary and an environmentally and technically sound safety measure, our refinery tries to minimize its use.
WHAT IS THE BLACK SMOKE?
Black smoke from the flare can occur when an insufficient amount of steam is available to help burn the hydrocarbons sent to the flare. Refinery personnel constantly watch the flare system via television monitors. If needed, they can adjust the steam flowing to the flare. In the rare instance of a sudden release of hydrocarbons to the system, there may be a delay in response before sufficient steam can be supplied to the burning process, and black smoke may be emitted.
WHAT IS THE RUMBLING NOISE?
Occasionally, during flare activity, a rumbling sound much like far-off thunder, resonates from the system. The rumbling that may be heard is the result of the turbulent mixing of vapors, air and steam during the flaring process.
REGULATING EMISSIONS
The BAAQMD strictly regulates emissions from the stacks and limits the density and duration of allowable smoke. Over time, the Martinez Refinery has taken a number of steps to recover and reprocess excess materials to lessen the flaring. However, when necessary, use of the flare system is still essential to the safe operation of the refinery.
OUR COMMITMENT
We are committed to safe, reliable and environmentally responsible operations, and we are committed to minimizing flaring in our operations.
Remember – when you see the flares burning, be assured that their role is to keep the refinery operating safely.
Ok maybe I just don’t understand what fun facts are. Wouldn’t be the first time.
Don’t worry, the clean air board is on the case and will be extorting them as usual. How dare they produce gasoline. Don’t they know who runs california?
Say that to the people that live by the refinery that can’t grow their own food because of the continuous criminal release of chemicals by MRC